hello and welcome to red stapler channel
in this video I’m going to show you my current PC that are used for web design
application development and some light gaming too let’s check it out the objective of this build is I wanted
to be small quiet and able to handle all the coding tasks why not too expensive
so I picked the thermaltake core p1 TG which is an open ITX case that allows
maximum ventilation and showing off the hardware at the same time for the CPU I
have I5 8400 6 cores CPU which have solid performance per value and able to handle
all the development tasks neutral and the reason why I didn’t pick the 9
generation i5 9400F mainly because it doesn’t have the built-in GPU which I
might need that later when I reused the CPU elsewhere plus difference in
performance is very small for the motherboard
I picked the H310M series from Asrock it’s an ATX board but small
enough to fit into the most of the ITX case now as a web developer you will
find yourself open lots of Chrome and Firefox apps along with couple instance
of Visual Studio or code editors which require memories
so I’d say itself you have at least 16 gigabytes of RAM available as for me I
went with 16 gigs T-force nighthawk note that this is an older model I got them
clearance sales that have only red light the current version will have the full
RGB with Aura sync support for the graphics card typically integrated
graphics should provide everything you need but if you want a triple monitors
or a multiple other widescreen setup you will need a dedicate card for me I just
reuse my old msi gtx 980 which has abundant output ports with a bonus for
who gaming experience at 1080p resolution for hard drive you definitely
need an SSD but to remain cost-conscious a combination of a small SSD for a
system install and a larger hard disk for data storage is a good idea as for
this build I just reuse my old 240 gigs into your SSD with two of one terabyte
disk drives for CPU cooler I used thermaltake water 3.0
provide excellent heat dissipation while remain super quiet and also a perfect
match for this case for a PSU I use 650 watts course areas budget series which
provides sufficient power while remain affordable at around $50 I also decided
to pay an extra for sleep cable mods from thermaltake and a temperature
sensor from Bykski this is unnecessary and purely for aesthetic both cost me
around $60 so conclusion this build cost me around $650 with a know that I have
reused my old graphics card and storage anyway you can find a link to the parts
that I use at the description box below hope this give you some ideas if you
love this video don’t forget to like or even subscribe for web development
tutorials thanks watching and see you next time bye

My Web Development PC Build in 2019

16 thoughts on “My Web Development PC Build in 2019

  • February 11, 2019 at 11:45 am
    Permalink

    Sir I want a best tutorial for php basic to advance

    Reply
  • February 11, 2019 at 11:49 am
    Permalink

    Nice video dude , that's what a video i was searching from 4 months . thumbs up for this awesome video

    Reply
  • February 11, 2019 at 12:01 pm
    Permalink

    sssoooo coool 🙂

    Reply
  • February 11, 2019 at 1:29 pm
    Permalink

    Неплохо!

    Reply
  • February 11, 2019 at 3:33 pm
    Permalink

    tech nerd who works at tech. AM I IN HEAVEN?

    Reply
  • February 11, 2019 at 4:57 pm
    Permalink

    The PSU in the video is not the same as the one in the description. The one in the description is the new VS650.

    Overall is a good PC, I would skip the sleeved cables and the thermometer. That GPU still powerful enough for medium to high graphics in AA or AAA games.
    And I think that the cooler is very overkill, but looks nice 👌

    For web development is very good.

    Reply
  • February 11, 2019 at 5:35 pm
    Permalink

    Nice one, but I'm genuinely confused about how the graphics card is plugged in the moherboard, how is it vertical??

    Reply
  • February 11, 2019 at 9:46 pm
    Permalink

    $650 for that build is really good!

    Reply
  • February 12, 2019 at 12:57 am
    Permalink

    Why do you need a PC for web development?

    Reply
  • February 12, 2019 at 1:38 am
    Permalink

    Lmao just for anybody watching, you DON'T need a brand new high-end PC for web development. I do my web development on a decade-old busted laptop and it's fine.

    If you computer can run notepad++ and a web browser, you can do web development.

    Reply
  • February 12, 2019 at 4:03 am
    Permalink

    Um computador desse aqui no Brasil custa mais do que um carro!

    Reply
  • February 17, 2019 at 11:32 am
    Permalink

    Connection SSD with HDD provide killing for both …. It must be the same speed during action! Learn more about computing

    Reply
  • February 17, 2019 at 5:56 pm
    Permalink

    To those who said web development doesn't require a fast PC. That's not accurate. If you have to work on backend dev, involving database, running VMs, Dockers, Kubernetes, multiple Visual Studio/Eclipse Instance, etc. then an entry level CPU with 16GB RAM is not even enough. SSD is also a must if you don't want to wait forever when opening IDE, opening apps, building projects, etc.
    While it's true you can still work on those with budget build, you'll have limited productivity (and frustration). But if you really have limited budget, my thought is SSD and RAM is the priority. Then CPU and Dual monitors respectively.
    Back in my corporate days, our office dev PC is i7 4790/ 8GB RAM/ 1TB HDD and lots of people are still complaining about slow project build, insufficient memory. And that's 4 years ago!

    Reply
  • August 2, 2019 at 2:20 pm
    Permalink

    How much price for building that kind of cpu?!

    Reply
  • October 27, 2019 at 1:29 am
    Permalink

    Shaji yetta very nice….. 😍😍😍

    Reply
  • November 4, 2019 at 2:03 pm
    Permalink

    Hi can i run unity engine in it smoothly

    Reply

Leave a Reply

Your email address will not be published. Required fields are marked *